Day 03 - Testing Prototypes

Today you need to set up your EDP. Include the Cornell notes we took on lift and drag the other day - that stuff belongs in the Research section of your EDP documentation. A photo of your best plane designs from yesterday should be in the Brainstorm section. And today we're going to write up the performance requirements as part of the Define section.

Test 1

• straight-line flight from one end of 2150 lengthwise across the room

Test 2

• when thrown straight (at blue X on back wall):
1. glide forward at least 1 meter without deviating more than 0.5 meter left or right
2. after passing the first meter, must achieve a 90° turn left before crossing the 2-meter line

Test 3

• when thrown straight (at blue X on back wall):
1. glide forward at least 1 meter without deviating more than 0.5 meter left or right
2. after passing the first meter, must achieve a 90° turn right before crossing the 2-meter line